Making it Work

Here is the EL wire hooked up and responding to a program as well as being powered by USB and by battery power:

Here is how the inverter is connected to the GND and to the TRIACs:

 Here is how the inverter is connected to the EL wire:

Problem:

"By daisy-chaining the TRIACs together we can use one inverter, but it also connects the pins together, so when we program for PIN 9, we are actually activating PINS 9, 11 and 13 together, so all three EL wires will come on anyway"

Goal:

"Run the 3 wires separately off one inverter" We know it is possible, we just need to figure out how to wire it.